The Effect of Installing Modified Copper in Muffler to Reduce CO Levels in Vehicle Exhaust

##plugins.themes.academic_pro.article.sidebar##

Published Jun 29, 2021
https://doi.org/10.37339/e-komtek.v5i1.545
Download
PDF
Statistic

Downloads

Download data is not yet available.
Vol. 5 No. 1 (2021)

##plugins.themes.academic_pro.article.main##

Arif Setyo Nugroho
Sekolah Tinggi Teknologi Warga Surakarta

Abstract

This study aims to determine the effectiveness of modified copper to reduce carbon monoxide (CO) levels. Copper in the form of a plate shaped like a honeycomb and altered with activated carbon (SiO) and ZSM-5. The test uses a four-stroke 125 CC two-wheeled motor vehicle, fuel using Petalite, gasohol E5, gasohol E10, gasohol E15. The test carried out is the emission test of the effect of fuel variations and modified copper. The use of petalite fuel, variations of honeycomb copper + activated carbon (SiO-C) + ZSM-5 is more effective because it can reduce CO levels the most, which is 3.66% CO at 9000 rpm engine speed. For E5 fuel, the use of a honeycomb-shaped copper exhaust + Titan dioxide (TiO2) + Activated carbon (SiO-C) + ZSM-5 reduces CO levels by 3.42% CO at 9000 rpm engine speed. On the other hand, E10 fuel reduces CO levels by 1.35% CO when using exhaust with honeycomb copper+ TiO2 + SiO-C +ZSM-5.

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite
Nugroho, A. S. (2021). The Effect of Installing Modified Copper in Muffler to Reduce CO Levels in Vehicle Exhaust. Jurnal E-Komtek (Elektro-Komputer-Teknik), 5(1), 123-132. https://doi.org/10.37339/e-komtek.v5i1.545

References

[1] D. S. Ismiyati, Devi Marlita, “Pencemaran Udara Akibat Emisi Gas Buang Kendaraan Bermotor.pdf,” J. Manaj. Transp. Logistik ( JIM TransLog), vol. 01, no. 03, pp. 241–248, 2014.
[2] Lelawati, “Pengujian Emisi Gas Buang Sepeda Motor Dengan Bahan Bakar Premium,” Maj. Tek. Simes, vol. 11, no. 1, pp. 1–5, 2017.
[3] A. H. P. Arif Setyo Nugroho, “KATALIS GRANULE CU-SiO 2 -C GUNA MEREDUKSI GAS BUANG CO PADA KENDARAAN BERBAHAN BAKAR GASOLIN DAN ETHANOL,” in Prosiding SNATIF, 2018, pp. 507–510.
[4] D. Maryanto, S. A. Mulasari, and D. Suryani, “Penurunan Kadar Emisi Gas Buang Karbon Monoksida ( CO ) Dengan Penambahan Arang Aktif,” KES MAS, vol. 3, no. 3, pp. 198–205, 1978.
[5] T. Arif Setyo Nugroho, Y Yulianto Kristiawan, “Reduction of CO and HC Emision on ZSM -5 Catalyst Supported o Activated Carbon in Motorcycle Fueled Gasolin-Ethanol Blends,” Medwell Journals, vol. 11, no. 6, pp. 1196–1200, 2016.
[6] G. Setyono and D. Khusna, “Pengaruh Variasi Penambahan Bahan Bakar Pertalite dengan Ethanol terhadap Performa Mesin SI ( Spark Ignition ) Fi -125cc 4 Langkah 1 Silinder,” J. Saintek, vol. 14, no. 2, pp. 69–73, 2017.
[7] A. S. Nugroho, “TRAKSI: Majalah Ilmiah Teknik Mesin,” Traksi, vol. 20, no. 1, pp. 59–71, 2020.
[8] A. H. Listiyono, Bambang Irawan, “Optimalisasi Composite Absorber Pada Muffler Untuk Menurunkan Kadar Emisi Gas Buang Motor Bensin,” J. Energi dan Teknol. Manufaktur, vol. 02, no. 01, pp. 13–22, 2019.
[9] D. R. Setiyono and D. Widjanarko, “Penggunaan Serbuk TiO 2 dan Karbon Aktif Sebagai Campuran Bahan Catalytic Converter Keramik untuk Mengurangi Polutan Berbahaya pada Kendaraan Bermesin Bensin Use of TiO 2 Powder and Activated Carbon as Catalytic Ceramic Filling Material to Reduce Hazardou,” vol. 13, no. 2, pp. 165–173, 2018.
[10] A. Mokhtar, “Catalityc converter jenis katalis plat tembaga berbentuk sarang lebah untuk mengurangi emisi kendaraan bermotor,” J. Gamma, vol. 10, no. 1, pp. 104–108, 2014.
[11] Yos Nofendri, “Pengaruh Penambahan Aditif Pada Bensin Ron 88 dan Ron 92 Terhadap Prestasi Mesin” Jurnal Konversi Energi dan Manufaktur UNJ, vol. 1, no. 1, pp. 33–39, 2018.
[12] A. S. N. Stefanus Unjanto, Martinus Heru Palmiyanto, Thoharudin, “Emisi CO DAN NOX Pada Gas Buang Kendaraan Menggunakan Katalis Tembaga Berporitermodifikasi.pdf.” pp. 117–124, 2015.