Effect of Extrusion Temperature Variations for Manufacturing 3D Printer Filament Based on Used Bottle Waste on Impact Strength

##plugins.themes.academic_pro.article.sidebar##

Published Jun 28, 2024
https://doi.org/10.37339/e-komtek.v8i1.1725
Download
PDF
Statistic

Downloads

Download data is not yet available.
Vol. 8 No. 1 (2024)

##plugins.themes.academic_pro.article.main##

Herru Santosa Budiono
Universitas Tidar
Sigit Joko Purnomo
Universitas Tidar

Abstract

Manufacturing 3d printer filaments based on used plastic bottle waste is a promising solution in reducing environmental impact while utilizing excessive available resources. This research aims to evaluate the effect of variations in manufacturing temperature (210°C, 220°C, and 230°C) on the impact strength of 3D printer filament based on used bottle waste. The experimental method was carried out by printing filament samples at each printing temperature and testing the impact strength using the Charpy method. The research results show that printing temperature affects the impact strength of the filament, with a temperature of 230°C providing optimal results.

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite
Santosa Budiono, H., & Purnomo, S. J. (2024). Effect of Extrusion Temperature Variations for Manufacturing 3D Printer Filament Based on Used Bottle Waste on Impact Strength. Jurnal E-Komtek (Elektro-Komputer-Teknik), 8(1), 168-176. https://doi.org/10.37339/e-komtek.v8i1.1725

References

[1] H. A. Pamasaria, T. H. Saputra, A. S. Hutama, and C. Budiyantoro, “Optimasi Keakuratan Dimensi Produk Cetak 3D Printing berbahan Plastik PP Daur Ulang dengan Menggunakan Metode Taguchi,” JMPM (Jurnal Mater. dan Proses Manufaktur), vol. 4, no. 1, pp. 12–19, 2020, doi: 10.18196/jmpm.4148.
[2] D. Iskandar, A. S. Sunarya, and G. Ananto, “Rancang Bangun Filament Extruder Machine Dengan Pemanfaatan Limbah Plastik Jenis Low Density Polyethylene Sebagai Bahan Baku 3D Printer,” Politek. Manufaktur Bandung, 2019.
[3] M. Taufik, G. Suryani Lubis, M. Ivanto, P. Studi Teknik Mesin, U. Tanjungpura, and J. H. Hadari Nawawi, “Rancang Bangun Mesin Pultrusion Pembuat Filamen 3D Printing Berbasis Limbah Plastik Botol PET,” Lubis & Ivanto, vol. 4, no. 1, pp. 1–08, 2023.
[4] M. L. Sonjaya, Mutmainnah, and M. F. Hidayat, “Construction of Plastic Waste Extruding Machine to Produce Filaments of 3D Printing Machine,” Int. J. Mech., vol. 16, pp. 82–90, 2022, doi: 10.46300/9104.2022.16.10.
[5] Y. A. Kusuma, D. H. A. Sudarni, J. T. Industri, F. Teknik, J. T. Kimia, and F. Teknik, “Tekmulogi?: Jurnal Pengabdian Masyarakat Pengenalan Pengolahan Sampah Botol Plastik Sebagai Bahan Baku Energi Alternatif Introduction to Plastic Bottle Waste Processing As Alternative Energy Raw Materials,” vol. 2, no. 2, pp. 93–102, 2022.
[6] N. Umam, “Universitas Diponegoro Rancang Bangun Alat Pembentuk Filament 3D,” 2023.
[7] A. Z. dan D. Yusri, “REKAYASA MESIN PEMBUAT FILAMEN DARI SAMPAH BOTOL PET UNTUK 3D PRINTING,” J. Ilmu Pendidik., vol. 7, no. 2, pp. 809–820, 2020.
[8] G. Atakok, M. Kam, and H. B. Koc, “Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: A statistical investigation,” J. Mater. Res. Technol., vol. 18, pp. 1542–1554, 2022, doi: 10.1016/j.jmrt.2022.03.013.
[9] ASTM International, “Astm D6110,” Annu. B. ASTM Stand., vol. 10, no. April, pp. 1–17, 2010, doi: 10.1520/D6110-10.1.