Arduino-based Automatic Light Design Using a Light-dependent Resistor Sensor at dr. H.A Rotinsulu Hospital
##plugins.themes.academic_pro.article.sidebar##
Downloads
##plugins.themes.academic_pro.article.main##
Abstract
Lights are one of the fundamental needs in the standard of living; if the light is cleared out, it'll squander power, and this often happens since you disregard to turn it off. in the list to fast improvement within the field of innovation the sum of power demand tends to extend quickly. This increment in demand can be caused by the expanding number of individuals utilizing electrical technology.In this case, a robotization light plan was made utilizing an Arduino-uno-based light sensor that can be set to turn on and off naturally, agreeing to the escalation of daylight so that it'll suit the desires of the lamp.The controller utilized is the Arduino microcontroller. The program connected to the microcontroller serves to initialize and design the equipment and examines the flag input from the light sensor, which at that point forms it is by being given a few conditions to create yield. In this case, a robotization light plan was made utilizing an Arduino-uno-based light-based Sensor that can be turned on and off, consequently concurring with the concentrated daylight received to suit the desires of the light.
##plugins.themes.academic_pro.article.details##
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
[2] R. Ainnur Rahman, O. Nurdiawan, and A. Rinaldi Dikananda, “Penerapan Kendali Sistem Otomatis Pada Lampu Halaman Asrama Menggunakan Arduino Pada Pondok Pesantren Al- Ma’Rifah,” JATI (Jurnal Mhs. Tek. Inform., vol. 8, no. 1, pp. 645–652, 2024, doi: 10.36040/jati.v8i1.8422.
[3] M. N. Agriawan, Sania, C. Rasmita, N. Wahyuni, and Maisarah, “Prototype Sistem Lampu Penerangan Jalan Otomatis Menggunakan Sensor Cahaya Berbasis Arduino Uno,” PHYDAGOGIC J. Fis. dan Pembelajarannya, vol. 4, no. 1, pp. 39–42, 2021, doi: 10.31605/phy.v4i1.1489.
[4] Nabil Azzaky and Anang Widiantoro, “Alat Penyiram Tanaman Otomatis Berbasis Arduino menggunakan Internet Of Things (IOT),” J-Eltrik, vol. 2, no. 2, p. 48, 2021, doi: 10.30649/j-eltrik.v2i2.48.
[5] M. Alfonsia Sanci and A. Astriany Rizky, “Perancangan Kunci Pintu Otomatis Pada Ruang Sentral Telekomunikasi (Sto) Di Telkom Menggunakan Solenoid Door Lock Dan Touch Sensor Berbasis Arduino Uno,” INFOKOM (Informatika & Komputer), vol. 10, no. 2, pp. 60–73, 2023, doi: 10.56689/infokom.v10i2.967.
[6] R. Arrahman, “Rancang Bangun Pintu Gerbang Otomatis Menggunakan Arduino Uno R3,” J. Portal Data, vol. 2, no. 2, pp. 1–14, 2022, [Online]. Available: http://portaldata.org/index.php/portaldata/article/view/78
[7] N. Nurhayati and B. Maisura, “Pengaruh Intensitas Cahaya Terhadap Nyala Lampu dengan Menggunakan Sensor Cahaya Light Dependent Resistor,” CIRCUIT J. Ilm. Pendidik. Tek. Elektro, vol. 5, no. 2, p. 103, 2021, doi: 10.22373/crc.v5i2.9719.
[8] F. Al Ghifari, A. Anjalni, D. Lestari, and U. Al Faruq, “Perancangan Dan Pengujian Sensor Ldr Untuk Kendali Lampu Rumah,” J. Kumparan Fis., vol. 5, no. 2, pp. 85–90, 2022, doi: 10.33369/jkf.5.2.85-90.
[9] E. S. Wirawan, Asni Tafrikhatin, and Instianti Elyana, “Design of a NodeMCU-Based Real-Time Air Quality Monitoring System Using the Blynk Application”, E-Komtek, vol. 7, no. 2, pp. 268-277, Dec. 2023.
[10] Wijaya, Asni Tafrikhatin, Ajeng Tiara Wulandari, and Asli Husain, “Rancang Bangun Buka Kunci Pintu Menggunakan RFID Berbasis Atmega 328 di Master Control Room Ratih TV Kebumen”, jasatec, vol. 2, no. 2, pp. 61-67, Oct. 2023.
[11] Wijaya, Asni Tafrikhatin, & Prasetyo, D. A. (2023). Rancang Bangun Pintu Geser Otomatis Menggunakan Sensor Ultrasonik Berbasis Mikrokontroler Atmega 328. JASATEC : Journal of Students of Automotive, Electronic and Computer, 2(1), 37-45. https://doi.org/10.37339/jasatec.v2i1.1424