Analysis of Cutting Parameters on Machining Time in C-Axis Collet Process Using CAM Software
##plugins.themes.academic_pro.article.sidebar##
Downloads
##plugins.themes.academic_pro.article.main##
Abstract
This study aims to analyze the effect of depth of cut and feed rate variations on machining time in the C-Axis collet process. The research method employed was an experimental approach using Mastercam software. This study's independent variables were variations in cut depth (0.5 mm, 0.8 mm, 1.0 mm) and feed rate (110 ft/min, 125 ft/min, 140 ft/min), while the controlled variable was a spindle speed of 1036 rpm. The tools used were 8 mm and 4 mm diameter flat endmills. The results showed that the shortest machining time was achieved in Toolpath 2 with a depth of cut of 1.0 mm and a feed rate of 140 ft/min, resulting in a time of 12.47 s. In contrast, the longest machining time occurred in Contour Toolpath 1 with a depth of cut of 0.5 mm and a feed rate of 110 ft/min, taking 141.15 s. This research can be further developed to establish standards for optimizing machining time efficiency in C-Axis processes.
##plugins.themes.academic_pro.article.details##
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
[2] Mutyalu, K. B., Reddy, V. V., Reddy, S. U. M., & Prasad, K. L., “Effect of machining parameters on cutting forces during turning of EN 08, EN 36 & mild steel on high speed lathe by using Taguchi orthogonal array,” Materialstoday: Proceedings, vol. 80, no. 3, pp. 2411-2415, 2023.
[3] Azahri, M. I., Hehsan, H., & Jaafar, M. R., “Machining Analysis on a Pin Chuck by using Mastercam Software,” Progress in Engineering Application and Technology, vol. 3, no. 1, pp. 729-741, 2022.
[4] Jia, S., Wang, S., Li, S., Cai, W., Liu, Y., Bai, S., & Li, Z. S., “Integrated multi-objective optimization of rough and finish cutting parameters in plane milling for sustainable machining considering efficiency, energy, and quality,” Journal of Cleaner Production, vol. 471, pp. 143406, 2024.
[5] Park, H. S., Qi, B., Dang, D. V., & Park, D. Y., “Development of smart machining system for optimizing feed rates to minimize machining time,” Journal of Computational Design and Engineering, vol. 5, no. 3, pp. 299-304, 2018.
[6] Kara, M. E., & Budak. E., “Optimization of Turn-milling Processes,” Procedia CIRP 33, pp. 476-483, 2015.
[7] Jarosz, K., Nieslony, P., & Loschner, P., “The effect of changes in depth of cut and cutting speed of CNC toolpaths on turning process performance,” Archives of Mechanical Technology and Materials, vol. 38, pp. 40-44, 2018.
[8] Schmitz, T., Davies, M., & Dutterer, B., “The application of high-speed CNC machining to prototype production,” International Journal of Machine Tools and Manufacture, vol. 41, no. 8, pp. 1209-1228, 2001.
[9] Hui, C. L. B., & Abdullah, H., “Minimization of Airtime in Machining Process Using Non-Conventional Method,” Research Progress in Mechanical and Manufacturing Engineering, vol. 2, no. 2, pp. 72-78, 2021.
[10] Saputro, R. D. A., Sukardi, T., Wibowo, Y. E., & Hardiyanta, R. A. P., “The Effect of Twist Drill Angle and Spindle Speed on Surface Roughness in S45C Steel Drilling Process,” Journal of Physics: Conference Series, vol. 1700, no. 1, pp. 012024, 2020.
[11] Sardjono KP, K., “Pengaruh Hardening Pada Baja JIS G 4051 Grade S45C Terhadap Sifta Mekanis dan Struktur Mikro,” Jurnal Sains dan Teknologi Indonesia, vol. 11, no. 2, pp. 95-100, 2009.
[12] Amstead B. H., Ostwald, P. F., and Begemen M. L., Manufacturing Processes. 8th ed. New York : Library of Congress Cataloging in Publication Data, 1995.